ta6f6.8a thru ta6f51a www.vishay.com vishay general semiconductor revision: 08-oct-13 1 document number: 89939 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 surface mount par ? transient voltage suppressors high temperature stability and high reliability conditions typical applications use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ics, mosfet, signal lines of sensor units for consumer, computer, industrial, and telecommunication. features ? very low profile - typical height of 0.95 mm ? junction passivation opti mzed design passivated anisotropic rectifier technology ?t j = 185 c capability suitable for high reliability and automotive requirement ? ideal for automated placement ? uni-directional only ? excellent clamping capability ? peak pulse power: 600 w (10/1000 s) ? aec-q101 qualified ? esd capability: iec 61000-4-2 level 4 ? - 15 kv (air) ? - 8 kv (contact) ? meets msl level 1, per j-std-020, lf maximum peak of 260 c ? material categorization: for definitions of compliance please see www.vishay.com/doc?99912 mechanical data case: do-221ac (slimsma) ? molding compound meets ul 94 v-0 flammability rating base p/nhm3 - halogen-free, rohs-compliant, and aec-q101 qualified terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 ? hm3 suffix meets jesd 201 class 2 whisker test polarity: color band denotes cathode end notes (1) non-repetitive current pulse, per fig. 3 and derated above t a = 25 c per fig. 2. (2) power dissipation mounte d on infinite heatsink (3) power dissipation mounted on minimum recommended pad layout primary characteristics v br 6.8 v to 51 v v wm 5.8 v to 43.6 v p ppm (10 x 1000 s) 600 w p d at t m = 65 c 6 w t j max. 185 c polarity uni-directional package do-221ac (slimsma) do-221ac slimsma tm top view bottom view maximum ratings (t a = 25 c, unless otherwise noted) parameter symbol value unit peak pulse power dissipation with a 10/1000 s waveform p ppm (1) 600 w peak pulse current with a 10/1000 s waveform i ppm (1) see next table a power dissipa tion on infinite heatsink, t m = 65 c p d (2) 6 w power dissipa tion, t m = 25 c p d (3) 1.1 operating junction and storage temperature range t j , t stg -65 to +185 c
ta6f6.8a thru ta6f51a www.vishay.com vishay general semiconductor revision: 08-oct-13 2 document number: 89939 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 note (1) pulse test: t p ? 50 ms notes (1) mounted on minimum re commended pad layout (2) mounted on infinite heatsink note (1) aec-q101 qualified electrical characteristics (t a = 25 c unless otherwise noted) device ? type device marking code breakdown voltage v br (1) at i t (v) test current i t (ma) stand-off voltage v wm (v) maximum reverse leakage at v wm i r (a) t j = 150 c maximum reverse leakage at v wm i r (a) maximum peak pulse surge current i ppm (a) maximum clamping voltage at i ppm v c (v) min. max. ta6f6.8a aep 6.45 7.14 10 5.80 500 1000 57.1 10.5 ta6f7.5a agp 7.13 7.88 10 6.40 250 500 53.1 11.3 ta6f8.2a akp 7.79 8.61 10 7.02 100 200 49.6 12.1 ta6f9.1a amp 8.65 9.55 1.0 7.78 25 50 44.8 13.4 ta6f10a app 9.5 10.5 1.0 8.55 5.0 20 41.4 14.5 ta6f11a arp 10.5 11.6 1.0 9.40 2.0 5.0 38.5 15.6 ta6f12a atp 11.4 12.6 1.0 10.2 2.0 5.0 35.9 16.7 ta6f13a avp 12.4 13.7 1.0 11.1 2.0 5.0 33.0 18.2 ta6f15a axp 14.3 15.8 1.0 12.8 1.0 5.0 28.3 21.2 ta6f16a azp 15.2 16.8 1.0 13.6 1.0 5.0 26.7 22.5 ta6f18a bep 17.1 18.9 1.0 15.3 1.0 5.0 23.5 25.5 ta6f20a bgp 19.0 21.0 1.0 17.1 1.0 5.0 21.7 27.7 ta6f22a bkp 20.9 23.1 1.0 18.8 1.0 5.0 19.6 30.6 ta6f24a bmp 22.8 25.2 1.0 20.5 1.0 5.0 18.1 33.2 ta6f27a bpp 25.7 28.4 1.0 23.1 1.0 5.0 16.0 37.5 ta6f30a brp 28.5 31.5 1.0 25.6 1.0 5.0 14.5 41.4 ta6f33a btp 31.4 34.7 1.0 28.2 1.0 5.0 13.1 45.7 ta6f36a bvp 34.2 37.8 1.0 30.8 1.0 5.0 12.0 49.9 ta6f39a bxp 37.1 41.0 1.0 33.3 1.0 5.0 11.1 53.9 ta6f43a bzp 40.9 45.2 1.0 36.8 1.0 10.0 10.1 59.3 ta6f47a cep 44.7 49.4 1.0 40.2 1.0 10.0 9.3 64.8 ta6f51a cgp 48.5 53.6 1.0 43.6 1.0 10.0 8.6 70.1 thermal characteristics (t a = 25 c unless otherwise noted) parameter symbol value unit typical thermal resistance, junction to ambient r ? ja (1) 145 c/w typical thermal resistance, junction to mount r ? jm (2) 20 c/w immunity to static electrical discharge to the following standards ? (t a = 25 c unless otherwise noted) standard test type test conditions symbol class value iec 61000-4-2 human body model (contact mode) c = 150 pf, r = 330 ? v c 4 > 8 kv human body model (air discharge mode) > 15 kv ordering information (example) preferred p/n unit weight (g) preferred package code base quantity delivery mode ta6f6.8ahm3/6a (1) 0.032 6a 3500 7" diameter plastic tape and reel ta6f6.8ahm3/6b (1) 0.032 6b 14 000 13" diameter plastic tape and reel
ta6f6.8a thru ta6f51a www.vishay.com vishay general semiconductor revision: 08-oct-13 3 document number: 89939 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ratings and characteristics curves (t a = 25 c unless otherwise noted) fig. 1 - peak pulse power rating curve fig. 2 - pulse power or current vs. initial junction temperature fig. 3 - pulse waveform fig. 4 - typical j unction capacitance fig. 5 - power dissipation derating curve fig. 6 - typical transient thermal impedance 0.1 1 10 100 1 10 100 1000 10 000 p ppm - peak pul s e power (kw) t d - pul s e width ( s ) 0 25 50 75 100 0 25 50 75 100 125 150 175 200 peak pul s e power (p pp ) or current (i pp ) derating in percentage, % t j - initial temperature ( c) 0 0 50 100 150 1.0 2.0 3.0 4.0 t r = 10 s t d = 1000 s i ppm - peak pul s e current (% i r s m ) t - time (m s ) t d peak value i ppm half value - i ppm i pp 2 t j = 25 c pul s e width (t d ) i s defined a s the point where the peak current decay s to 50 % of i ppm 10 100 1000 10 000 1 10 100 c j - junction capacitance (pf) v br - break-down voltage (v) mea s ured at s tand-off voltage, v wm mea s ured at zero bia s t j = 25 c f = 1.0 mhz v s ig = 50 mv p-p 0 1 2 3 4 5 6 7 0 25 50 75 100 125 150 175 200 p d - power di ss ipation (w) t a - ambient temperature ( c) fr-4 board, on minimum recommended pad layout t a =t m , mounted on inifinite heat s ink 1 10 100 1000 0.01 0.1 1 10 100 1000 tran s ient thermal impedance ( c/w) t p - pul s e duration ( s )
ta6f6.8a thru ta6f51a www.vishay.com vishay general semiconductor revision: 08-oct-13 4 document number: 89939 for technical questions within your region: diodesamericas@vishay.com , diodesasia@vishay.com , diodeseurope@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package outline dimensions in inches (millimeters) do-221ac ( s lim s ma) cathode band 0.106 (2.70) 0.098 (2.50) 0.047 (1.20) 0.030 (0.75) 0.047 (1.20) min. 0.047 (1.20) min. 0.123 (3.12) max. 0.217 (5.52) ref. 0.060 (1.52) min. 0.057 (1.45) 0.049 (1.25) 0.039 (1.00) 0.035 (0.90) 0.012 (0.30) 0.006 (0.15) 0.171 (4.35) 0.163 (4.15) 0.211 (5.35) 0.199 (5.05) typ.: 0.019 (0.48) mountin g pad layout
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
